Tuesday, April 21, 2020

,
3pcs Modbus RTU 7-24V Relay Module RS485/TTL 1-way Input and Output with Anti-reverse Protection
3pcs Modbus RTU 7-24V Relay Module RS485/TTL 1-way Input and Output with Anti-reverse Protection3pcs Modbus RTU 7-24V Relay Module RS485/TTL 1-way Input and Output with Anti-reverse Protection3pcs Modbus RTU 7-24V Relay Module RS485/TTL 1-way Input and Output with Anti-reverse Protection



Product parameters:
 
1. On-board mature and stable 8bit MCU and MAX485 level conversion chip
2. Communication protocol: support standard Modbus RTU protocol
3. Communication interface: Support RS485 / TTL UART interface
4. Communication baud rate: 4800/9600/19200, default 9600bps, support power saving
5. Photocoupler input signal: DC3.3-30V (This input cannot be used for relay control)
6. Output signal: relay switch signal, support manual, flash-off, flash-off mode, the delay base of flash-off / flash-off is 0.1S, the maximum settable flash-off / flash-off time is 0xFFFF * 0.1S = 65535 * 0.1 S = 6553.5S
7. Device address:  1-255, default 255, support power-down save
8. Onboard one 5V, 10A / 250V AC 10A / 30V DC relay, which can continuously attract 100,000 times, with diode leakage protection, short response time
9. Onboard relay switch indicator
10. Supply voltage: DC7-24V, with input anti-reverse protection

3pcs Modbus RTU 7-24V Relay Module RS485/TTL 1-way Input and Output with Anti-reverse Protection


1. VCC, GND: DC7-24V power input
2. IN, GND: DC3.3-30V optocoupler signal input
3. A +, B-: RS485 communication interface, A +, B- are connected to A +, B-
4. Relay switch signal output
NC: normally closed end, the relay is short-circuited to COM before pull-in, and left floating after pull-in;
COM: public end;
NO: Normally open, the relay is suspended before the pull-in, and shorted to COM after the pull-in.
5. Relay indicator: lit when the relay is on
6. GND, RXD, TXD: TTL level UART communication interface, GND, RXD, TXD are respectively connected to GND, TXD, RXD of the external control terminal
 
Package includes:

3 x Modbus RTU 7-24V Relay Module

3pcs Modbus RTU 7-24V Relay Module RS485/TTL 1-way Input and Output with Anti-reverse Protection





3pcs Modbus RTU 7-24V Relay Module RS485/TTL 1-way Input and Output with Anti-reverse ProtectionSee detail


,
Xiaomi MiReader E-book HD 6 Inch 1GB+16GB Intelligent Office Touch ink Screen Ebook Reader Tablet Electronic Paper Sensing E-book
Xiaomi MiReader E-book HD 6 Inch 1GB+16GB Intelligent Office Touch ink Screen Ebook Reader Tablet Electronic Paper Sensing E-bookXiaomi MiReader E-book HD 6 Inch 1GB+16GB Intelligent Office Touch ink Screen Ebook Reader Tablet Electronic Paper Sensing E-bookXiaomi MiReader E-book HD 6 Inch 1GB+16GB Intelligent Office Touch ink Screen Ebook Reader Tablet Electronic Paper Sensing E-book



Features:

Xiaomi Duokan electronic paper sensing E-book is equipped with 6-inch high-definition electronic ink screen, 212 PPI, 24-level reading light, 16GB storage, 1GB memory, Allwinner 4-core 1.8GHz CPU, and a weight of 178 grams. Equipped with Android 8.1 system.

Xiaomi Duokan electronic paper sensing E-book supports Duokan reading resources, Xiaomi/WeChat account login, support cloud disk login download, support Office series format. Specifically, support Baidu cloud, multi-view cloud login one-click download, support common txt, epub, pdf format, rearrange according to the situation, also access WPS, support Office series doc, Excel, PPT and so on.

Xiaomi Duokan electronic paper sensing E-book haves 1800mAh battery, Type-C interface, and it is more convenient to charge. Adjustable fonts, multi-level font sizes, and multi-level contrast.

Package included:

1 x Xiaomi Duokan E-book
1 x USB Cable




Xiaomi MiReader E-book HD 6 Inch 1GB+16GB Intelligent Office Touch ink Screen Ebook Reader Tablet Electronic Paper Sensing E-bookSee detail


,
Step Down Module Constant Current Drive Power TTL Suitable for 200mW-2W 405/445/450/520nm Red/Green/Blue Lasers
Step Down Module Constant Current Drive Power TTL Suitable for 200mW-2W 405/445/450/520nm Red/Green/Blue LasersStep Down Module Constant Current Drive Power TTL Suitable for 200mW-2W 405/445/450/520nm Red/Green/Blue LasersStep Down Module Constant Current Drive Power TTL Suitable for 200mW-2W 405/445/450/520nm Red/Green/Blue Lasers



Specification:

Circuit control: 12V step-down circuit, constant current output (current and voltage are adjustable)
Output specifications: Max 2A
Scope of application: 200mW-2W 405/445/450 / 520nm red, green and blue laser drive power
Dimensions: 29 * 49mm (width * length), component height including board 15.5mm
Input voltage: 8-14V

 Package includes:

 1 x Step down module





Step Down Module Constant Current Drive Power TTL Suitable for 200mW-2W 405/445/450/520nm Red/Green/Blue LasersBuy Now


,
AI-Thinker ESP-12s WiFi Module ESP8266 Serial Port to WiFi Wireless Transparent Transmission Industrial Grade
AI-Thinker ESP-12s WiFi Module ESP8266 Serial Port to WiFi Wireless Transparent Transmission Industrial GradeAI-Thinker ESP-12s WiFi Module ESP8266 Serial Port to WiFi Wireless Transparent Transmission Industrial GradeAI-Thinker ESP-12s WiFi Module ESP8266 Serial Port to WiFi Wireless Transparent Transmission Industrial Grade



Features:

Based on ESP8266 chip development, the module integrates transparent transmission function, ready to use, supports serial AT command set, users can achieve network access through the serial port, widely used in smart wear, smart home, home security, remote control, automotive electronics , Smart lighting, industrial Internet of Things and other fields.

Module model

ESP-12S

Description

Package form

SMD16

Patch

Module size

24*16*3mm

± 0.2mm

Certification information

/

FCC / CE

SPI FLASH

32Mbit

Default

Support interface

/

UART / GPIO / ADC / PWM

Available IO port

9

/

Serial port speed

4608000bps

Support 300 ~ 4608000bps, default 115200bps

Spectrum Fan

2.4GHz

2412-2484MHz

Antenna form

on-board

Onboard PCB antenna, transmission distance is about 100 meters

Transmit power

/

802.11b: 16 ± 2dBm; 802.11g: 16 ± 2dBm; 802.11n: 16 ± 2dBm;

Safety

/

WEP / WPA-PSK / WPA2-PSK

Power supply range

3.3V

3.0-3.6V, current> 500mA

Operating temperature

Industrial grade

-20°C ~ + 85 °C

AT support

Built-in intelligent processing

Can be read by AT command


Number

Pin Name

Function

1

RST

Reset

2

ADC

A / D conversion result. Input level range 0 ~ 1V, value range: 0 ~ 1024

3

EN

Chip enable terminal, high level effective

4

IO16

GPI016, can do deep sleep to wake up when receiving RST pin

5

IO14

GPI014.HSPLCLK

6

IO12

GPI012.HSPLMIS0

7

IO13

GPIO13, HSPLMOSI; UART0.CTS

8

VCC

3.3V power supply (VDD); the output current of external power supply is recommended to be above 500mA

9

GND

Ground

10

IO15

GPI015, MTDO; HSPICS; UARTO_RTS

11

IO2

GPI02.UART1.TXD

12

IO0

GPIOO, download mode: external pull low, operating mode: floating or external pull high

13

IO4

GPI04

14

IO5

GPI05JR.R

15

RXD

UART0_RXD; GPIO3

16

TXD

UARTO_TXD; GPI01


 Package includes:

 1 x ESP-12s WiFi Module




AI-Thinker ESP-12s WiFi Module ESP8266 Serial Port to WiFi Wireless Transparent Transmission Industrial GradeSee detail


Search This Blog

Follow Us @soratemplates