Friday, April 10, 2020

,

LM393 Single Axis Tilt Sensor Module SCA60C Tilt Detection Sensor Module DC 5V for Smart Car

0 Comments
LM393 Single Axis Tilt Sensor Module SCA60C Tilt Detection Sensor Module DC 5V for Smart Car
LM393 Single Axis Tilt Sensor Module SCA60C Tilt Detection Sensor Module DC 5V for Smart CarLM393 Single Axis Tilt Sensor Module SCA60C Tilt Detection Sensor Module DC 5V for Smart CarLM393 Single Axis Tilt Sensor Module SCA60C Tilt Detection Sensor Module DC 5V for Smart Car


Get LM393 Single Axis Tilt Sensor Module SCA60C Tilt Detection Sensor Module DC 5V for Smart Car


 
-Working voltage: DC 5V
-Main chip: LM393, tilt sensing probe
-Analog voltage output of inclination signal (0-180 ° corresponds to 0.5-4.5V), which can be collected by single-chip microcomputer AD;
-Two-way tilt signal alarm output;
-The low level indicator of the output effective signal is on;
-The alarm range of left and right tilt angle is adjustable from 0-90 ° to 90-180 °, the adjustment accuracy is ± 1 °
-With mounting holes to facilitate fixed installation;
-The tilt signal of the circuit board is TTL high and low level, which can be directly connected to the IO port of the microcontroller.
-Application: Intelligent body balance detection, teaching experiment demonstration, product development, etc .;
-Dimensions: 3.1 x 2.1 x1.5 cm
 
Interface Description:
 
1 VCC external 5V voltage
2 GND External GND
3 DO1 left tilt TTL level output port, directly connected to the IO port of the single-chip microcomputer, which is the threshold signal;
4 DO1 right tilt TTL level output port, directly connected to the IO port of the single-chip microcomputer, which is the threshold signal;
5 VO is the voltage signal corresponding to the angle conversion, and the output is an analog voltage value, which can be connected to the input port of the single-chip microcomputer with AD
 
Package Included:
 
1 x LM393 Single Axis Tilt Sensor Module







LM393 Single Axis Tilt Sensor Module SCA60C Tilt Detection Sensor Module DC 5V for Smart CarSee detail


By -
,

MoesHouse RF WiFi Smart Touch Curtain Blinds Roller Shutter Switch With RF Remote Controller Tuya Smart Life App Remote Control Work with Alexa Echo Google Home

0 Comments
MoesHouse RF WiFi Smart Touch Curtain Blinds Roller Shutter Switch With RF Remote Controller Tuya Smart Life App Remote Control Work with Alexa Echo Google Home
MoesHouse RF WiFi Smart Touch Curtain Blinds Roller Shutter Switch With RF Remote Controller Tuya Smart Life App Remote Control Work with Alexa Echo Google HomeMoesHouse RF WiFi Smart Touch Curtain Blinds Roller Shutter Switch With RF Remote Controller Tuya Smart Life App Remote Control Work with Alexa Echo Google HomeMoesHouse RF WiFi Smart Touch Curtain Blinds Roller Shutter Switch With RF Remote Controller Tuya Smart Life App Remote Control Work with Alexa Echo Google Home


Buy MoesHouse RF WiFi Smart Touch Curtain Blinds Roller Shutter Switch With RF Remote Controller Tuya Smart Life App Remote Control Work with Alexa Echo Google Home


Features:

1.RF+WiFi Touch Panel Curtain Switch:With the powerful functional smart curtain switch,we are easily able to transform our house into a smart one.
Intelligently control our curtains in a much easier and smarter way.RF remote and manual control your curtains optional.More importantly,one remote 
is able to control a group of smart curtain switches.Besides,it can work with smart curtain motor or roller shutter to realize automation for all curtains at home.
Simply add motorized shades or other similar devices to your smart home with Smart Curtain Motor!(Note:the curtain motor is not included in the package)
2.Control from Anywhere:Control the curtains anytime from anywhere with your phone using 'Smart Life' APP.Close the curtain automatically when you are away from home.What's more,the new update version of the curtain switch supports backlight off on APP,providing much more humanized intelligent operation design for your smart lifestyle.
3.Hands-Free Voice Control:Compatible with Amazon Alexa and Google Home to voice your curtains, enables you a smarter and more convenient life by freeing your hands.
4.Multi-scenario Matching:Match different kinds of curtains such as window blinds/rolling blinds/venetian blinds. Install the Smart Curtain Switch in a lot of places, like office/ study/ bedroom/ living room ect., even control the Awning in your yard.
5.Schedules&Countdown:Set schedules to control the curtains on your own timetable. Automatically open your curtain at the time you get up and close the curtain when you go to bed. When you take a nap, set a countdown to open the curtains to wake you up.
ATTENTION:The Remote Can Only Work with the RF+WIFI Curtain Switch.

Parameter:

Curtain Switch:
Working Voltage:AC 100-240V 50/60Hz
Maximum Power:≤1000W
Standby Power:≤0.5W
Working Temperature:0-80℃
WiFi Protocol:IEEE 802.11 b/g/n
Connection Mode:Zero Line ,Fire Line

RF Remote:
Frequency:433 MHz
Standard Code:1527
Wireless Communication:RF
Not include Battery

Package included:

1 x Curtain Switch
1 x User Guide Installation
1 x RF Remote Controller




MoesHouse RF WiFi Smart Touch Curtain Blinds Roller Shutter Switch With RF Remote Controller Tuya Smart Life App Remote Control Work with Alexa Echo Google HomeBuy Now
By -
,

150V 10A 150W LCD Digital Adjustable Constant Current Electronic Load Battery Tester Lithium Discharge Capacity Voltage Meter

0 Comments
150V 10A 150W LCD Digital Adjustable Constant Current Electronic Load Battery Tester Lithium Discharge Capacity Voltage Meter
150V 10A 150W LCD Digital Adjustable Constant Current Electronic Load Battery Tester Lithium Discharge Capacity Voltage Meter150V 10A 150W LCD Digital Adjustable Constant Current Electronic Load Battery Tester Lithium Discharge Capacity Voltage Meter150V 10A 150W LCD Digital Adjustable Constant Current Electronic Load Battery Tester Lithium Discharge Capacity Voltage Meter


Get 150V 10A 150W LCD Digital Adjustable Constant Current Electronic Load Battery Tester Lithium Discharge Capacity Voltage Meter


Features:
 
1. Screen and interface
2.2 inch LCM Screen, STN (yellow-green mode), display more content, large font, clear and not hurting eyes,
10 regular interfaces + 4 over-limit alarm interfaces
1 English display + 1 Chinese display (included in 10 regular display) 
2. Test input interface
Rich input interface to meet different input requirements
20A high current occlusion screw column, Type A USB, Mini USB, Micro USB, Type-C, 5.5*2.1mm male Connector
Note that only high current occlusal screw posts support up to 10A input, other ports do not support 
3. 3.7-inch fan Integrated heat sink, ABS base, with self-locking screw, firm and durable
Silent fan 22±3dBA, bearing fan, continuous operation for more than 40,000 hours
Intelligent temperature control, automatic start and stop, automatic start at temperature over 40 °C
12*12mm light touch button Comfortable and light 100,000 lifespan, one button, multiple controls,
270°±5° large angle adjustable knob resistance, double knob combination, easy to adjust and sensitive, fast response
M3 copper and copper columns, the module is solid and firm
Double-layer design, simple and elegant appearance
4. Overrun protection
Voltage, current, power over-limit automatic stop input, sound + interface double alarm prompt, protection module and tested power supply, to avoid damage
Low voltage protection, over voltage protection, current over limit protection, power over limit protection
Equipped with AC100V~240V to 12V power supply, Chinese and English manual, universal
EVA lining, with easy-to-carry carton, sturdy and beautiful, cushioning and rolling 
5. Application range
General test of various power supplies, adapters, data lines, etc.
 
Specifications:
 
Power Voltage:DC 6~12V   
Interface:DC 5.0V
Voltage measure range:0~150V Accuracy:0.05V
Current adjustable range:0~10A Accuracy:0.05A
Capacity range:0~999.999Ah  Accuracy:0.001Ah
Cumulative range:0~99999.9Wh Accuracy:0.01Wh
Measure range:0~2999.9W Accuracy:0.01W
Impedance range:0~999.9Ω Accuracy:0.01Ω
Temperature range:0~99℃ Accuracy:1℃  
Max timing :999:59:59  Accuracy:1s
Fan cooling power:<150W
Fan control threshold:Temp>40℃
Standby reminder threshold:<2W/0.5h;
Timing function:>0.5W start timing
Input interface: 20A high current occlusion screw column, type A USB,Mini USB, Micro USB, Type-C USB
Refresh time:>500ms/time  
Measurement rate: 0.5time/s
Over limit alarm: interface warning and buzzer alarm
Voltage overrun auto- stops discharge range:0~150V
Current overrun auto- stops discharge range:0~10A
Power overrun auto- stops discharge range:0~150W
Display screen: LCM display
Size:149×96×80mm/195×105×135mm
 
Consumption:<1.5A    
Operating temp:-10~60℃
Operating  humidity:10~80
 
Mode Button Function Description:
 
1. Click to switch each display interface
2. The function of the button operation in the 2-4 interface is as follows:
A.long press all records to clear;
B.Double-click capacity (Ah) to reset to zero;
C.three-stroke power (Wh) reset to zero;
D.four-stroke power (00:00:00) reset to zero;
E.consecutive seven hits at no load, making the current zero accurate in the current temperature environment.Calibration is zeroed for accurate measurement at low currents;Factory reset all parameters.
3. The operation functions of the buttons under the interfaces 6, 7, 9, 11, and 13 are as follows:
A.Double-click the parameter value to increase, double-click and long press the parameter to continue to increase;
B.The value of the three-stroke parameter is reduced, and the length of the three-stroke is continued to decrease.
 
How to Use:
 
1. Input voltage × current ≤ 150W;
2. Turn on the load power supply, and the coarse and fine adjustment knobs will be reset to zero (counterclockwise to the end)
3. Long press the mode button to clear all data;
4. Connect to the power supply under test, and use the fine adjustment knob to slowly adjust the discharge current.When the fine adjustment cannot meet the current value, the fine adjustment is reset to zero, and the coarse adjustment knob is slowly adjusted.And with fine adjustment until the required current value is reached.
5. It is recommended to set the cutoff voltage (lower voltage input) when the battery is discharged.In order to avoid damage caused by excessive discharge.
 
Package Included:
 
1 x Intelligece Electronic Load Tester
1 x US Power Adapter
1 x EU Power Converter








150V 10A 150W LCD Digital Adjustable Constant Current Electronic Load Battery Tester Lithium Discharge Capacity Voltage MeterSee detail


By -
,

W3231 Incubator Temperature Controller Thermometer Cool/Heat Digital Dual Display with NTC Sensor AC 110-220V/DC12V/DC 24V

0 Comments
W3231 Incubator Temperature Controller Thermometer Cool/Heat Digital Dual Display with NTC Sensor AC 110-220V/DC12V/DC 24V
W3231 Incubator Temperature Controller Thermometer Cool/Heat Digital Dual Display with NTC Sensor AC 110-220V/DC12V/DC 24VW3231 Incubator Temperature Controller Thermometer Cool/Heat Digital Dual Display with NTC Sensor AC 110-220V/DC12V/DC 24VW3231 Incubator Temperature Controller Thermometer Cool/Heat Digital Dual Display with NTC Sensor AC 110-220V/DC12V/DC 24V


Get W3231 Incubator Temperature Controller Thermometer Cool/Heat Digital Dual Display with NTC Sensor AC 110-220V/DC12V/DC 24V


Description:

Temperature Control Range: -55°C~120°C/-67°F~ 248°F
Temperature Control Accuracy: 0.1 °C / 0.1 °F
Display Color: Red + Blue
Working Power Supply: DC12V /DC 24V /AC110V~220V
Temperature Sensor: 1M NTC 10K 
Product Size: 79.2mm×41.9mm×26.3mm
Hole Size: 72.1mm×39.2mm
 
Operation and Display Panel

Temperature Controller Panel

 

Warning code

 

Code

Reason for error

Solution

HHH

Temperature exceeds alarm temperature

The temperature drops below the alarm temperature and returns to normal.

LLL

No temperature sensor detected

Replacement reconnect temperature sensor

 

Indicator light

 

Color

Indicating situation

Red

The red light flashes and the heating mode is delayed.;The red light is always on, heating mode is running.

Blue

Blue light flashes, cooling mode delay starts;

The blue light is always on ,cooling mode is running.

 

Instructions:
 

1. Short press “SET” small dital tube to flash, press “△” or “▽” to set the target temperature, press “Standby” button or no operation to save the setting within 3 seconds.

2. Press and hold “SET” to enter the code setting mode, press “△” or “▽” to switch the code. After selecting, press “SET” to enter the code setting. After setting, press “Standby” button or no operation to save the setting within 3 seconds. .

3. The last parameter setting is saved by default after shutdown.

4, restore the factory settings: press and hold "SET" to power on.

5. When the module is powered on, it will start directly. After power-on, press and hold the “standby” button, the module will enter “sleep” or “wake up”;  if power failure, the module will run automatically after power recovery, no need to start manually.

 

Package Include:
 
 1 x W3231 Incubator Temperature Controller Thermometer





W3231 Incubator Temperature Controller Thermometer Cool/Heat Digital Dual Display with NTC Sensor AC 110-220V/DC12V/DC 24VSee detail


By -

Thursday, April 9, 2020

,

All Metal Dual-head Two-color Mixing Nozzle Cooling Block Heatsink for Extruded Aluminum Block

0 Comments
All Metal Dual-head Two-color Mixing Nozzle Cooling Block Heatsink for Extruded Aluminum Block
All Metal Dual-head Two-color Mixing Nozzle Cooling Block Heatsink for Extruded Aluminum BlockAll Metal Dual-head Two-color Mixing Nozzle Cooling Block Heatsink for Extruded Aluminum BlockAll Metal Dual-head Two-color Mixing Nozzle Cooling Block Heatsink for Extruded Aluminum Block


Buy All Metal Dual-head Two-color Mixing Nozzle Cooling Block Heatsink for Extruded Aluminum Block


Parameters:
 

Name: E3D type dual nozzle heat block

Color: silver

Size: 18 * 30 * 30
 
 Package Included:
 
 1 x dual nozzle heat block


  




All Metal Dual-head Two-color Mixing Nozzle Cooling Block Heatsink for Extruded Aluminum BlockBuy Now
By -
,

3D Printer Part 1.75mm/3.0mm Filament Break Connector

0 Comments
3D Printer Part 1.75mm/3.0mm Filament Break Connector
3D Printer Part 1.75mm/3.0mm Filament Break Connector3D Printer Part 1.75mm/3.0mm Filament Break Connector3D Printer Part 1.75mm/3.0mm Filament Break Connector


Buy 3D Printer Part 1.75mm/3.0mm Filament Break Connector


Instructions for use:
 

1. Convenient, easy to operate and cost-effective, suitable for the connection of consumables of various materials.

2 Modify the heads of two consumables that need to be connected

3. One end penetrates from the large end of the connector to the score line, and the other end penetrates from the small end to the exposed 1-2mm. Suppress the excited heartbeat and light the lighter to 5-7 seconds (this time is mainly for ordinary PLA ABS, other harder consumables should be slightly longer)

4. The first thing to put down the lighter is to quickly push the consumables from the small end into the small hole of the big end, and slowly (must not be fast) full of expectations. When the connector is exposed, slowly pull it back and forth several times.

5. After the consumables are completely cooled, push the consumables completely from the small end until the interface can be easily repaired. Use small to trim the interface, test the effect after cleaning (bend the interface carefully and straighten it, then bend and straighten it), if you hear a clear sound, it means that our kung fu is still at home, and it is the only option. , Don't be sad. Actually, I don't feel well.

6. Unscrew the bolt at the end of the lug groove of the connecting piece, take out the consumables, and then assemble the connector for the next use.
 

Note: Do not use in environments with flammable and explosive gas and dust.
 
 Package Included:
 
 1 x 1.75mm/3.0mm Filament Break Connector


 




3D Printer Part 1.75mm/3.0mm Filament Break ConnectorBuy Now
By -

Search This Blog

Follow Us @soratemplates